极细同轴线公座线束制备工艺
线束准备的主要过程:
1.准备电缆装配
2.将电缆组件安装到公座主体组件上，并将裸露的导线焊接到公座信号端子上
3.定位锁扣装配(或锁扣) 公座部件
4.盖上公座外壳，焊接所需的区域以完成公座线束
首先，对极细同轴线进行预处理，以便于线束装配。经过预处理的电缆称为电缆组件。这种预处理简化了连接器的电缆焊接过程，提高了公座线束质量的稳定性。这是在电缆被焊接到连接器之前完成的。将电缆外层导体焊接于连接器外壳，电缆外层导体通过连接器与PCB板电气连接，以获得良好的接地特性。

以下是对JAE HD系列极细同轴线的分析

JAE has recently developed the HD Series connectors (HD1: 40 pos., HD2: 30 pos.) for notebook PC LCD interface applications. The HD Series connectors are compatible with LVDS transmission and LED backlight as standardized in the VESA® 16:9 Wide Notebook Panel Standard, and are licensed products for the Dai-ichi Seiko Co., Ltd. (I-PEX) CABLINE-VS.
     用途：Notebook PC LCD interface applications    
     特征：                               

1. Products licensed by Dai-ichi Seiko Co., Ltd. (I-PEX)                         
2. Fully compatible with the Dai-ichi Seiko Co., Ltd. (I-PEX) CABLINE-VS
3. Compatible with LVDS transmission.
4. HD1: 40 position (receptacle and plug); HD2: 30 position (receptacle)
5. Lead-free   
6. Halogen-free                          

     一般规格：

Number of Contacts	40 pos. (HD1), 30 pos. (HD2)
Pitch	0.5 mm
Rated Voltage	AC, DC each 100 V/ contact
Insulation Resistance	1000 megohm min.
Dielectric Withstanding Voltage	AC 250 Vr.m.s. (1 minute)
Operating Temperature Range	-40 deg. C to +85 deg. C
Applicable Cable	#36 to #32 AWG (discrete wire) , #44 to #36 AWG (fine-wire coaxial)

 
本系列的产品列表明细：
 

Part Number	Pincount	connectorType	Features
HD1P040-CSH2-10000	40	Cover Sell for plug	Board-to-Cable connector for High-speed transmission connector, Cover Sell for plug, 40 pos.
HD1P040MA1R6000	40	Cable side plug	Board-to-Cable connector for High-speed transmission connector, 40 pos., Cable side plug
HD1S040HA1R6000	40	Board side receptacle	Board-to-Cable connector for High-speed transmission connector, 40 pos., Board side receptacle
HD2S030HA1R6000	30	Board side receptacle	Board-to-Cable connector for High-speed transmission connector, 30 pos., Board side receptacle